Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Server Utilization

Status
Not open for further replies.
Wkeaton

Wkeaton

IS-IT--Management
Dec 7, 2001
9
0
0
US
I have a netware 3.12 server which on ocassion has very very high utilization. It doens't last long but I would like to know how to find out what is causing the spikes. Any suggestions?
 
Sort by date Sort by votes
I´ve got the same Problem, but no real solution yet.
But our cachbuffers in Resource Utilization is only 69 % - we might need more than just 32 MB RAM - which we hopefully won´t install any more an down Netware 3 forever switching to Netware 5
 
Upvote 0 Downvote
Never found a solution either. Our server does have 96 megs of RAM though. Still have the same problem.
 
Upvote 0 Downvote
My servers have 1Gb ram and the utilization jumps through the roof for a couple of seconds then drops back down. I shouldn't worry about it!
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

wavestar69
  • Locked
  • Question
Trouble starting WinFrame 1.7 after replacing server
Replies
0
Views
54
wavestar69
wavestar69
jimbo2364
  • Locked
  • Question
Novell NetWare Server 65. Server name locations
Replies
2
Views
76
lgarner
lgarner
doobster1
  • Locked
  • Question
cannot connect to presentation server 4 protocol driver error
Replies
0
Views
41
doobster1
doobster1
ChuckWoodbury
  • Locked
  • Question
Adding Netware 5.1 Server to Existing Tree
Replies
8
Views
89
goombawaho
goombawaho
UnknownEntity
  • Locked
  • Question
Xenserver running server 2008 r2 with remote desktops enabled.
Replies
0
Views
49
UnknownEntity
UnknownEntity

Part and Inventory Search

Sponsor

Back
Top