JeroenDortmans
Technical User
I have a server 2003R2 which is a DC, terminal server, DHCP server, DNS server.
My clients are XP SP2 and one W2k SP4.
The server has tow NIC’s one for the intranet and one connected to the internet.
The server acts as a NAT router.
I enabled VPN so I can use terminal server from outside the company.
Everything works fine except that when I browse the network in explorer on the server I see the domain but I do not see the client computers, I only see the server.
When I browse the network in explorer on a client then I see all client computers but I do not see the server.
I made a logon script for the users to enable some network drives. The network drives are shares on the server. This works fine. Also another logon script to enable printers on the clients works fine.
I have tried the following: change the isdomainmaster key (HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Browser\Parameters\isdomainmaster) to true on my domain controllers (server).
I restarted the browsing service but no difference.
I also checked the firewall on the server in “routing and RAS”. The simple firewall is only enabled on the NIC connected to the internet.
At this moment I do not know what to do to enable viewing all clients together with the server when browsing the network in explorer. I need some help!!!
My clients are XP SP2 and one W2k SP4.
The server has tow NIC’s one for the intranet and one connected to the internet.
The server acts as a NAT router.
I enabled VPN so I can use terminal server from outside the company.
Everything works fine except that when I browse the network in explorer on the server I see the domain but I do not see the client computers, I only see the server.
When I browse the network in explorer on a client then I see all client computers but I do not see the server.
I made a logon script for the users to enable some network drives. The network drives are shares on the server. This works fine. Also another logon script to enable printers on the clients works fine.
I have tried the following: change the isdomainmaster key (HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Browser\Parameters\isdomainmaster) to true on my domain controllers (server).
I restarted the browsing service but no difference.
I also checked the firewall on the server in “routing and RAS”. The simple firewall is only enabled on the NIC connected to the internet.
At this moment I do not know what to do to enable viewing all clients together with the server when browsing the network in explorer. I need some help!!!