Guest_imported
New member
- Jan 1, 1970
- 0
IF NO NOVELL SERVER IS DESIGNATED THE PREFERRED SERVER WHICH SERVER WILL IT CONNECT TO ON THE NETWORK!!!
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
SERVER IDENTIFICATION PROBLEM!!!
- Thread starter Guest_imported
- Start date
- Status
Workstation connection is always established to the first server that responds to Get Nearest Server (GNS).
Logic used by the client for preferred server:
1) Uses the server that the user is logging into (i.e. whatever is on the GUI Login).
2) Uses the Default Server field of the user if they are logging into the tree as specified in NDS.
3) Uses the preferred server in the control panel if neither are specified.
4) Uses the first server that the attachment is made to if none of the others exist
You must use at least client version 3.1 (W9.x) or 4.6 (NT) for preferred server to work. At present the client used should be 3.3 w/sp3(W9.x) or 4.8 w/sp3(NT/2000).
Good luck,
Mark ;-)
Logic used by the client for preferred server:
1) Uses the server that the user is logging into (i.e. whatever is on the GUI Login).
2) Uses the Default Server field of the user if they are logging into the tree as specified in NDS.
3) Uses the preferred server in the control panel if neither are specified.
4) Uses the first server that the attachment is made to if none of the others exist
You must use at least client version 3.1 (W9.x) or 4.6 (NT) for preferred server to work. At present the client used should be 3.3 w/sp3(W9.x) or 4.8 w/sp3(NT/2000).
Good luck,
Mark ;-)
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question