Server expansion system upgrade files not going over

[phoneTTech]

I have upgraded a server edt. to 11.0.4. I have one site that is not connected with fiber. Something is blocking the files. I used to be able to upgrade locally. How can i do this from a pc with windows manager on their local network? Any help is appreciated.

 

[derfloh]

You can do it the same way as you do it on a standalone IP500. But you should solve the root cause better.

IP Office remote service

https://www.fwilke.com/home

Fixed price SIP trunk configuration:

https://www.fwilke.com/en/ip-office-sip-trunk-en/

CLI based cale blocking:

https://blog.fwilke.com/ip-office-block-calls-from-specific-cli/

SCN fallback over PSTN:

https://blog.fwilke.com/ip-office-scn-fallback/

 

[jfilary]

What release are you trying to upgrade to? I ran into a similar problem that was fixed with the 11.0.4 SP1 release (July 31st 2019). My expansion systems would fail every time at around 60%. I was also unable to run a local upgrade of the expansion systems outside of the normal server edition upgrade process.


IP Office 11.0.4.1.0 Build 11 – Resolved field issues

IPOFFICE-150660
Upgrade failing for 500v2 expansions with error Upgrade Failed; Failing at task 'Pull Upgrade', step 'Pulling files'

ACSS-SME | ACIS-SME | APSS-SME