Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Server 2003 Domain No Internet to Network Computers

Status
Not open for further replies.

jhonea

IS-IT--Management
Jun 2, 2006
9
US
I am running a Server 2003 domain, and trying to get the computers on the network to connect to the internet. Here is what I have so far:

-The server CAN connect to the internet.

-The computers on the network can connect to the server and access the shared files, however they cannot access the internet.

The network TCP/IP settins are as follows:

Network Card 1. (hooked to network switch)
IP: 192.168.200.1
Subnet Mask: 255.255.255.0
Gateway: 75.51.62.153
DNS: 192.168.200.1

Network Card 2. (hooked to DSL router)
IP: 75.51.62.154
Subnet Mask: 255.255.255.252
Gateway: 75.51.62.153
DNS: 67.134.189.215

I'm pretty sure the settings for Network Card 1 are probably wrong. Any suggestions?
 
several options, use routing/ras, bridge the connections or setup a proxy server, best advice is get a router with firewall

M. Knorr

MCSE, MCTS, MCSA, CCNA
 
Thanks for the reply.

We had a firewall connected, but it didn't survive a power outage we just had. I've got another one ordered, but it won't be here till Monday. I was trying to allow our users access to the internet until then. I've set up the RAS as best I could, but I don't know if I'm missing something there. I've used the above mentioned settings, but I think I'm still missing something.
 
Best option is to bridge the two nic's this will get you running.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top