Hi,
I have been wrestling with a serial attached printer issue now for the past couple of days and am in desperate need of some new ideas.
IBM 6F1 ( newly installed)
AIX 4.3.3.
8 port asyn adpt
IBM 6400 line printer
We are able to print single and multiply small job however the printer goes to a down state if a large job is ran. The number of pages that is printed varies. Flow control is set to Xon on both printer and lp01. File systems have plenty of space. We receive the following error message via root mail after the queue goes down and we attempt to bring it back up.
0782-054 Error detected during output to printer.
The device name is lp0 (generic)
The errno (error number) from the write system call is 6
Use local problem reporting procedures.
We looked up the 054 code and none of the suggestion helped.
So anyone out there that can help shed light on this will forever be my hero *:->*
I have been wrestling with a serial attached printer issue now for the past couple of days and am in desperate need of some new ideas.
IBM 6F1 ( newly installed)
AIX 4.3.3.
8 port asyn adpt
IBM 6400 line printer
We are able to print single and multiply small job however the printer goes to a down state if a large job is ran. The number of pages that is printed varies. Flow control is set to Xon on both printer and lp01. File systems have plenty of space. We receive the following error message via root mail after the queue goes down and we attempt to bring it back up.
0782-054 Error detected during output to printer.
The device name is lp0 (generic)
The errno (error number) from the write system call is 6
Use local problem reporting procedures.
We looked up the 054 code and none of the suggestion helped.
So anyone out there that can help shed light on this will forever be my hero *:->*