Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Serial Printer EPSON 850

Status
Not open for further replies.

AvayaHE

Systems Engineer
Feb 9, 2018
135
CH

One of our customers connected an Epson 850 serial printer.
Now this is broken and must be replaced.
Unfortunately, I can not read the configuration anymore.
Does anyone know the settings yet?
 
Connected the printer to what? The maintenance terminal or a tty port for reports?
 
Is this a cabinet, chassis or a large system? A cabinet/chassis system those settings are through software. A large system those settings are done at the TTY Card level, possibly a paddle board.
 
These settings would typically be the baud rate and then 8/n/1 for parity.
 
thank you
I meant printer it self except speed parity and stopp bit what else neddsto enter
Speciallly DIP Switches
I ve got no expiriences that way
Do you have an example configuration or similar
 
Every printer is different. You will have to get the book on the printer. First you have to know how the PBX is set up and then match the printer to that. I would say a typical set up is 9600 8/N/1. That's all the PBX cares about. The printer needs to match.
 
Found a soloution internet
RS232 DCE special wiring are in those solution in use

Speed 1200
BITL 7
Par even
Stop 1

80's stuff ;)
But thank you anyway for quick response
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top