Send Name Display

[EngMajd1982]

Hi to All,

How can I send Display Name between Business Communication Manager BCM450, and Communication Server 1000 Option11c, in both directions.Note that the link between two PABX is through PRI Card.So I want to know how can i configure the BCM and CS to show Name in display.

Thanks

 

[Firebird Scrambler]

The CS1000 D Channel settings will need a RCAP setting with either ND2 or ND3 adding in.

There should be a "Business Name" option on the BCM under "Telephony", "Global Settings" that usually needs a site name adding in.

I think there is another setting on the BCM that needs to be checked.

All the best

Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK

http://www.linkedin.com/in/davidbromley

If it's working, then leave it alone!.