send a-number to public network

[motard]

I Have a 3300 CXI.
So far I sent all the calls with main number to the public network, I mean whoever makes the call, the Controller send the main number. My problem is that I want to send to the public network the DID of each extension. Anyone could help me to program this.

Thanks beforehand.

I have forget to say that the range of the number are different I mean they don´t follow a serie structure.
For example:
The DID number is 982472452 for the extension 3000
The second DID number is 98235476 for the extension 3001
For incoming calls it´s programmed with System Speed Call.

 

[Lundah]

And how are you connecting to the PSTN? Analog trunks, digital trunks, PRI? If you're using PRI you have to program your CPN tables either in ESM for the embedded module or via IMAT if you have an NSU.

 

[motard]

It´s OK Lundah
I´m connecting to the PSTN with BRIs. If you don´t program the CPN you can´t send " calling number " in the Setup of RDSI trace.
Thanks