Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Semaphore timeout during Verify

Status
Not open for further replies.

gwilhelm

MIS
May 15, 2001
1
US
I am getting a Job completion status of Failed almost every day now during my backup. It seems that the Backup is working fine but during the verify of C:\System

the message:

Storage device "Seagate O" reported an error on a request to read data from media.

Error reported:
The semaphore timeout period has expired.
^ ^ ^ ^ ^

Verify completed on 5/15/01 at 3:22:50 AM.
Verified 2318 files in 178 directories.
0 files were different.
Processed 448,910,007 bytes in 6 minutes and 41 seconds.
Throughput rate: 64.1 MB/min

Job ended: Tuesday, May 15, 2001 at 3:24:34 AM
Job completion status: Failed

I am reading thing about SCSI drivers and such.

Is anyone familiar with this problem?

Thanks

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top