Self Test a Universal Trunk Card

[janaya]

I don't have my CDs or books with me and I was wondering if you know of a command to invoke a self test on a Universal Trunk Card?

thanks

John Anaya

 

[acewarlock]

Plug it in.

 

[srmega41]

To my knowledge, and after referring to the NTP's, I do not know of any way to envoke a self-test using software. As Ace said, plug it in and look for the lights. Three flashes of red, followed by a solid red on an unused card is good.

Hope this helps,

Scott M.

 

[johnpoole]

do you have trunks programed? you can do some ld 36 test on those trunks.. i used to just dial the acod then disu that trunk and dial the acod again

ld 36
call c u

sets up a call to a test number from the term to the test center.. but i haven't played with analog trunks in a decade or better

john poole
bellsouth business
columbia,sc