Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations biv343 on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Selection Help 1

Status
Not open for further replies.

ecugrad

MIS
Apr 17, 2001
191
US
Having some difficulties. I have two tables named Woblog & Processlog, both contain a WobID field. The Woblog table shows all WobIDs that have been created. The Processlog table shows the WobIDs from the Woblog table if they have been worked.

I want to produce a report that displays only the WobID's that are contained in the Woblog table that are not in the Processlog table. This will tell me how many still need to be worked.

I'm using CR8

Thanks,
Mike

 
Left outer join the tables by the WOBID, and then in the Report-Edit Selection Formula-Record place something like:

isnull({Processlog.WobID})

Please remember to post technical information so we aren't guessing at possible solutions:

Crystal version
Database/connectivity
Example data
Expoected output

-k
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top