Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Selected boot image did not authenticate 2

Status
Not open for further replies.

CDIV

Technical User
Nov 28, 2015
65
DZ
Dear all,

I have HP PROBOOK 450 G3 with win 10 pre installed.
I want replace win 10 by 7 .
it doesn't have Bios only UEFI . with rufus I created an usb boot , GPT for Uefi so when I boot the laptop from usb I read this message . Selected boot image did not authenticate . for info Secure boot is disabled and legency enabled .

Please help me please . Thanks in advance

Regards
 
I just recently got a 250 to work with W7 but Im pretty sure there are not any drivers for W7 on the 450 series. Did you find any before trying to downgrade?

Learning - A never ending quest for knowledge usually attained by being thrown in a situation and told to fix it NOW.
 
Hi DrB0B?
THank you for your reply,
No I didn't found.

I explain you more about this issue
1- My manager has some softwares which works on xp asked me to install win xp on this machine, firstly I tried so without results.

2-I installed a virtual machine Vmware and it worked however a VM it is not a professional solution.
3- I thought install a win 7 with xp mode .
4-win 7 won't boot , I tried everything without result
this machine is 100% UEFI .
I read this in Hp website " Hp probook 450 G3 designed for 8.1 /10
How ever there is Win 7 drivers I downloaded all of them.
thanks
 
Hi,

Now I have this message ""A required CD/DVD drive device driver is missing error""

Please help me
Thanks
Regards
 
> a VM it is not a professional solution

Some might disagree with this.
 
Dear strongm,


when I said VM it is not a professional solution I mean for people who are not trained like my manager also VM it is not allowed by our company's polices
could you please support me.

Regards
 
Hey guys,

I find the solution thanks guys.


Regards

vamoushi
 
CDIV,

What solution did you find? Did you change the BIOS/Setup options away from UEFI to Legacy? On some computers I recently had to work with, the OEM incorrectly installed Windows 7 but provided media for Windows 10. It was set to Legacy boot instead of UEFI. To allow Windows 10 to install, I had to change the setup option to UEFI. I'd imagine it'd just be the opposite in your scenario.

Whenever you find a solution to your problem, don't just say "it's fixed", but always provide what the solution was. The whole idea with such a setup as tek-tips forums is knowledge-sharing. It's not sharing if you don't actually share.

"But thanks be to God, which giveth us the victory through our Lord Jesus Christ." 1 Corinthians 15:57
 
Hello guys,

Hairlesssupportmonkey
Sorry I was so busy at my new job.

Steps to install win 7 on HP PROBOOK 450 G3

requirement

1-usb drive (8GB)
2- ISO WIN 7 (32 or 64 bit)
3- the attached file USB 3.0 DRIVER
4-Rufus
5-ubuntu

1- Create a Bootable USB Drive by using this setting (GPT partition scheme for UEFI).
2-uefi setting ( Legacy enabled, secure boot disabled) save changes, once your machine restarted you need to type the code """""don't forget enable your keypad"""" followed by ENTER.
then boot your machine from ubuntu.

2- use Gparted to format partitions and use GPT table.
4-unzip the attached driver and copy it into HDD partition you want.

5-boot your machine on usb after this windows will request driver "A required CD/DVD drive device driver is missing error" then browse to your hdd and choose driver folder and istall the nice driver " you need to click on "NEXT" to times.

Now you can show your partition and you can continue the installation .

if you have other questions don't hesitate.

Regards

Karim Vamoushi


 
 http://files.engineering.com/getfile.aspx?folder=e9e10695-c3b2-460e-8f57-2e166423606d&file=Intel(R)_USB_3.0_eXtensible_Host_Controller_Driver_4.0.6.60.zip
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top