Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Seems to drop packets

Status
Not open for further replies.

maynarja

MIS
Jan 24, 2007
41
CA
I am seeing some weird issues.

I have 2 ACL, 1 for the crypto and the other for nonat


access-list outside_cryptomap_20 permit ip 192.168.12.0 255.255.255.0 10.0.3.0 255.255.255.0
access-list outside_cryptomap_20 permit ip 192.168.12.0 255.255.255.0 172.16.0.0 255.255.240.0
access-list outside_cryptomap_20 permit ip 192.168.12.0 255.255.255.0 205.210.65.0 255.255.255.0
access-list outside_cryptomap_20 permit ip 192.168.12.0 255.255.255.0 205.210.67.0 255.255.255.0


access-list nonat extended permit ip 192.168.12.0 255.255.255.0 10.0.3.0 255.255.255.0
access-list nonat extended permit ip 192.168.12.0 255.255.255.0 172.16.0.0 255.255.240.0
access-list nonat extended permit ip 192.168.12.0 255.255.255.0 205.210.65.0 255.255.255.0
access-list nonat extended permit ip 192.168.12.0 255.255.255.0 205.210.67.0 255.255.255.0

It seems the nonat does not have any increasing in the hit count.

Also if I ping say 10.0.3.1 it takes a bit but will finally ping, if i try to ping another host on the same subnet it either does not or I have to wait a while. If i ping another network it takes a long time to respond.


I have also use "crypto isakmp nat-traversal 3600" but no differences..

I have also changed "timeout xlate 8:00:00" again no differences.
 
The nonat access-lists wont increase in their hit count. When you ping 10.0.3.1 how many pings does it miss before it starts pinging?
 
I think the issue comes down to 10 host inside limitation.

And that is correct about the nonat
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top