MAJORHAZZARD
Technical User
Hey someone i have a bit of a problem as in i have several customers that i support as engineer i admin these site remotely with no problem,(customer 1) i connect with remote vnc (I run a script that will copy the relevent files to remote client i.e vncviewer and the dlls).
However upon installing Cisco VPN client i have discoverd that if i have the secure remote services running without the vnc tunnel being open, i cannot connect using cisco vpn to access (customer 2) now i know you cannot have 2 tunnels so if i stop the services for secure remote client and then start cisco VPN i still get no connection the only way i can get connected to (cust2) is to stop services and set to manual then reboot system then i can connect.
But if i then disconnect from (cust2) and try to connect to (cust1) with the vnc client i get no connection does anyone have any ideas would greatly appreciate it TIA...<<M@JORHAZZARD>>
However upon installing Cisco VPN client i have discoverd that if i have the secure remote services running without the vnc tunnel being open, i cannot connect using cisco vpn to access (customer 2) now i know you cannot have 2 tunnels so if i stop the services for secure remote client and then start cisco VPN i still get no connection the only way i can get connected to (cust2) is to stop services and set to manual then reboot system then i can connect.
But if i then disconnect from (cust2) and try to connect to (cust1) with the vnc client i get no connection does anyone have any ideas would greatly appreciate it TIA...<<M@JORHAZZARD>>