Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations biv343 on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Second dial tone removal

Status
Not open for further replies.

motox2

Programmer
Jun 21, 2007
426
GY
Hello, I have an issue im sure its simple to resolve, but I cant remember how. I have a CS1K (7.5) and After I dial my DSC of 69 (FLEN=0), I get dialtone as normal, then proceed to finish dialing the number. The strange thing is that when I finish dialing the number, it gives me dialtone again, and then the PBX proceeds to ring the number. Can somebody please tell me how to remove this second dialtone so that the system will dial the DN immediately after I key it in? There is a fix for this, but again I cant remember what I did the last time on a different route I was working with. Thanks again for the help
 
Sounds like the Dialtone is coming from the Far End not the CS1K

OLD ROLMEN WORKING ON NORTELS AND AVAYA
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top