RetrogradePAK
IS-IT--Management
I have a proliant DL 380 G4 server and have set to backup some local drives+shared drives via batch files that runs through the scheduler. This setup was made almost an year back and everything worked fine.
I am using the windows backup and have the HP SDLT 300/600 drive. For the past couple of weeks without any particular reason (i have not done any changes to the server, the backup is failing randomnly, sometimes the local drives are not backed up while sometimes the mapped drives. The errors from backup report and event viewer are given below. HELP!!
WINDOWS BACKUP REPORT
---------------------
Error: The device reported an error on a request to read data from media.
Error reported: Invalid command.
There may be a hardware or media problem.
Please check the system event log for relevant failures.
Error: ??: is not a valid drive, or you do not have access.
EVENT VIEWER
------------
Event Type: Error
Event Source: cpqcissm
Event Category: None
Event ID: 9
Date: 12/23/2008
Time: 1:35:05 AM
User: N/A
Computer: PAKAFIPR01
Description:
The device, \Device\Scsi\cpqcissm1, did not respond within the timeout period.
For more information, see Help and Support Center at Data:
0000: 00 00 10 00 01 00 6a 00 ......j.
0008: 00 00 00 00 09 00 04 c0 .......À
0010: 01 01 00 50 00 00 00 00 ...P....
0018: 00 00 00 00 00 00 00 00 ........
0020: 00 00 00 00 00 00 00 00 ........
0028: 00 00 00 00 00 00 00 00 ........
0030: 00 00 00 00 07 00 00 00 ........
Event Type: Error
Event Source: cpqcissm
Event Category: None
Event ID: 11
Date: 12/23/2008
Time: 1:35:06 AM
User: N/A
Computer: PAKAFIPR01
Description:
The driver detected a controller error on \Device\Scsi\cpqcissm1.
For more information, see Help and Support Center at Data:
0000: 0f 00 10 00 01 00 6a 00 ......j.
0008: 00 00 00 00 0b 00 04 c0 .......À
0010: 0b 00 00 00 00 00 00 00 ........
0018: cb 93 03 00 00 00 00 00 Ë?......
0020: 00 00 00 00 00 00 00 00 ........
0028: 00 00 00 00 05 00 00 00 ........
0030: 00 00 00 00 07 00 00 00 ........
I am using the windows backup and have the HP SDLT 300/600 drive. For the past couple of weeks without any particular reason (i have not done any changes to the server, the backup is failing randomnly, sometimes the local drives are not backed up while sometimes the mapped drives. The errors from backup report and event viewer are given below. HELP!!
WINDOWS BACKUP REPORT
---------------------
Error: The device reported an error on a request to read data from media.
Error reported: Invalid command.
There may be a hardware or media problem.
Please check the system event log for relevant failures.
Error: ??: is not a valid drive, or you do not have access.
EVENT VIEWER
------------
Event Type: Error
Event Source: cpqcissm
Event Category: None
Event ID: 9
Date: 12/23/2008
Time: 1:35:05 AM
User: N/A
Computer: PAKAFIPR01
Description:
The device, \Device\Scsi\cpqcissm1, did not respond within the timeout period.
For more information, see Help and Support Center at Data:
0000: 00 00 10 00 01 00 6a 00 ......j.
0008: 00 00 00 00 09 00 04 c0 .......À
0010: 01 01 00 50 00 00 00 00 ...P....
0018: 00 00 00 00 00 00 00 00 ........
0020: 00 00 00 00 00 00 00 00 ........
0028: 00 00 00 00 00 00 00 00 ........
0030: 00 00 00 00 07 00 00 00 ........
Event Type: Error
Event Source: cpqcissm
Event Category: None
Event ID: 11
Date: 12/23/2008
Time: 1:35:06 AM
User: N/A
Computer: PAKAFIPR01
Description:
The driver detected a controller error on \Device\Scsi\cpqcissm1.
For more information, see Help and Support Center at Data:
0000: 0f 00 10 00 01 00 6a 00 ......j.
0008: 00 00 00 00 0b 00 04 c0 .......À
0010: 0b 00 00 00 00 00 00 00 ........
0018: cb 93 03 00 00 00 00 00 Ë?......
0020: 00 00 00 00 00 00 00 00 ........
0028: 00 00 00 00 05 00 00 00 ........
0030: 00 00 00 00 07 00 00 00 ........