I am running a cable for a TTY device and need the pinouts for the connectors on each end. I will be using a 9 pin male connector on the switch side plugging into a quad paddleboard and a 9 pin female connector on the opposite end plugging into a serial port on a PC with Hyperterminal.
I have the 9 pin connectors on each end that I can pin myself. Just need to know which color goes to which pin number on the DB9 on each end. Will have just a regular cat 5 network cable running between them.
Thanks
I have the 9 pin connectors on each end that I can pin myself. Just need to know which color goes to which pin number on the DB9 on each end. Will have just a regular cat 5 network cable running between them.
Thanks