CallwaveEmp
Technical User
- Aug 30, 2002
- 106
A problem I formerly posted as "Can't run simultaneous Jobs" I have more clearly identified as "Tape Drives get locked for no reason, for an unidentifiable amount of time".
I have Arcserve 2kSP4, w/ an Adic Tape Library. 48 Slots in 4 Media Groups, and 3 Physical DLT8000 tape Drives. 2 devices are listed in the Device Manager as "Locked", with no tapes in the drives.
I need to check the firmware of the drives, but, this did not seem to happen before we upgraded from SP2.
D
I have Arcserve 2kSP4, w/ an Adic Tape Library. 48 Slots in 4 Media Groups, and 3 Physical DLT8000 tape Drives. 2 devices are listed in the Device Manager as "Locked", with no tapes in the drives.
I need to check the firmware of the drives, but, this did not seem to happen before we upgraded from SP2.
D