Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

SCSI Setup Questions - Adaptec Controller & Seagate Disks

Status
Not open for further replies.
gavm99

gavm99

IS-IT--Management
May 18, 2004
809
0
0
GB
Hi all,

I haven't installed a SCSI setup from scratch before so I need some advice.

I have purchased a Adaptec AHA-2940UW Ultrawide SCSI PCI adapter and several Seagate Barracuda 9Gb, SCA, ULTRA SCSI 2 Hard Disks to go with it.

I have a few questions which I am sure will be straight forward for some of you:

1) Can I connect the drives to this card?
2) If so, what lead do I need?
3) Can I connect both drives in a 'chain' using this card?

I realise I will have to tackles ID's, termination and power but I just want to start with the basics and go from there.

Many thanks in advance.

 
Status
Not open for further replies.

Similar threads

Sps Pros
  • Question
How to replace a Dell EqualLogic Controller
Replies
0
Views
232
Sps Pros
Sps Pros
dudecrush
  • Locked
  • Question
Seagate Hard Drive Replacement Question
Replies
2
Views
132
DrB0b
DrB0b
LeonardRougeau
  • Locked
  • Question
backplane from scsi sas to sata
Replies
2
Views
54
LeonardRougeau
LeonardRougeau
maybeimaleo
  • Locked
  • Question
Is There A Calculation For Number of SSD Disk Per FC Disks?
Replies
0
Views
39
maybeimaleo
maybeimaleo
cmunozq
  • Locked
  • Question
Can a SUN Disk Controller for storagetek 6180 work for a StorageTek 6140?
Replies
0
Views
45
cmunozq
cmunozq

Part and Inventory Search

Sponsor

Back
Top