Hi there,
I just installed a CD-R/RW into my Gateway PIII/450 mHZ computer. Windows 2000 PRO service pack 3
Config- CD-ROM -Slave for secondary IDE
CD-R/RW-Master for secondary IDE
scsi adapter in one PCI slot
Ethernet card in another
Printer hookedup to the parallel port
one floppy- Slave for Primary IDE
one hard drive- Master for Secondary IDE
The CD-R/RW will play audio CD's fine and is functioning properly according to the device manager.
When I try to run the Burning software "B's RecorderGold5.09" I get the error-
"Stop:0x000000D1 (0x000000DB, 0x00000012, 0x00000000, 0xEB4571787)
Driver_IRQL_not_les_or_equal"
I tried updating to the latest version of B's- same result
My IRQ report is-
System Information report written at: 10/12/2002 10:20:04 AM
[IRQs]
IRQ Number Device
9 Microsoft ACPI-Compliant System
9 NVidia Riva TNT
9 Intel 82371AB/EB PCI to USB Universal Host Controller
9 Creative AudioPCI (ES1371,ES1373) (WDM)
9 Intel(R) PRO/100+ Management Adapter
1 Standard 101/102-Key or Microsoft Natural PS/2 Keyboard
12 Logitech-compatible Mouse PS/2
8 System CMOS/real time clock
13 Numeric data processor
6 Standard floppy disk controller
4 Communications Port (COM1)
3 Communications Port (COM2)
14 Primary IDE Channel
14 SCSI/RAID Host Controller
15 Secondary IDE Channel
15 SCSI/RAID Host Controller
System Information report written at: 10/12/2002 10:22:38 AM
[Problem Devices]
Device PNP Device ID Error Code
Primary IDE Channel PCIIDE\IDECHANNEL\4&CB9060A&0&0 32
Secondary IDE Channel PCIIDE\IDECHANNEL\4&CB9060A&0&1 32
I tried changing to plug in play in the bios but that did not help.
My guess is that I do not need the SCSI/RAID host controller's set to IRQ, 14 and 15 (Same as Primary and secondary IDE)? I know I can change the IRQ's manually but do not know which I should change. I am afraid of messing up my system.
Any ideas?
Thanks!
Marc
Guinea pigs make the world a nicer place!
Piggydad30@hotmail.com
I just installed a CD-R/RW into my Gateway PIII/450 mHZ computer. Windows 2000 PRO service pack 3
Config- CD-ROM -Slave for secondary IDE
CD-R/RW-Master for secondary IDE
scsi adapter in one PCI slot
Ethernet card in another
Printer hookedup to the parallel port
one floppy- Slave for Primary IDE
one hard drive- Master for Secondary IDE
The CD-R/RW will play audio CD's fine and is functioning properly according to the device manager.
When I try to run the Burning software "B's RecorderGold5.09" I get the error-
"Stop:0x000000D1 (0x000000DB, 0x00000012, 0x00000000, 0xEB4571787)
Driver_IRQL_not_les_or_equal"
I tried updating to the latest version of B's- same result
My IRQ report is-
System Information report written at: 10/12/2002 10:20:04 AM
[IRQs]
IRQ Number Device
9 Microsoft ACPI-Compliant System
9 NVidia Riva TNT
9 Intel 82371AB/EB PCI to USB Universal Host Controller
9 Creative AudioPCI (ES1371,ES1373) (WDM)
9 Intel(R) PRO/100+ Management Adapter
1 Standard 101/102-Key or Microsoft Natural PS/2 Keyboard
12 Logitech-compatible Mouse PS/2
8 System CMOS/real time clock
13 Numeric data processor
6 Standard floppy disk controller
4 Communications Port (COM1)
3 Communications Port (COM2)
14 Primary IDE Channel
14 SCSI/RAID Host Controller
15 Secondary IDE Channel
15 SCSI/RAID Host Controller
System Information report written at: 10/12/2002 10:22:38 AM
[Problem Devices]
Device PNP Device ID Error Code
Primary IDE Channel PCIIDE\IDECHANNEL\4&CB9060A&0&0 32
Secondary IDE Channel PCIIDE\IDECHANNEL\4&CB9060A&0&1 32
I tried changing to plug in play in the bios but that did not help.
My guess is that I do not need the SCSI/RAID host controller's set to IRQ, 14 and 15 (Same as Primary and secondary IDE)? I know I can change the IRQ's manually but do not know which I should change. I am afraid of messing up my system.
Any ideas?
Thanks!
Marc
Guinea pigs make the world a nicer place!
Piggydad30@hotmail.com
