SCSI problem

[montanye]

I have a customer who is trying to install a RAID on HP UX 11.11 He can only see the device with scan not the partition mapped to the SCSI ID. He has 2 RAID sets with 8 partitions on one and 7 on the other. He can only see and use 2 of the 15 partitions. Any one know of any issues with SCSI on HP UX 11.11, also the device and HBA are Ultra 320.

Thanks

 

[Chacalinc]

I don't understand what do you mean with "partition mapped to the scsi ID". HP-UX doesn't use partitions, it uses logical volumes and volume groups with LVM.

 

[montanye]

The problem has been solved, thatnks