I am trying to install an additional Scsi drive to my system. Unfortunately it also has operating system installed. When booting up the machine boots from the wrong HDD. How do I set up the scsi chain so the system boots up from the correct drive or alternatively how can I prevent the wrong drive from being used at boot up.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
SCSI HDD Setup
- Thread starter erpentz
- Start date
nightowl17
Technical User
The boot selection can be made in the device manager , to tell you where will have to know what OS you are using Hope This Helps Solve Your Problem
nightowl17
nightowl17
thatrenowned
MIS
Go into your BIOS and set up the Boot Sequence to not be your SCSI device.
Some common BIOS' have the orders like:
A, C, CDROM
SCSI, C, A
C, A, CDROM
CDROM, A, C
etc etc
Maybe yours is set as SCSI first?
Regards
Some common BIOS' have the orders like:
A, C, CDROM
SCSI, C, A
C, A, CDROM
CDROM, A, C
etc etc
Maybe yours is set as SCSI first?
Regards
- Status