Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

scsi hard drives won't complete mirror

Status
Not open for further replies.

Maligkong

MIS
Feb 14, 2002
19
US
I've got two SCSI hard drives on an adaptec 29320 controller, IBM Netvista PC. SCSI utilities on boot up sees both hard drives, but I can't get it to complete the RAID 1 mirror. It gets about 40% through, then just stops. Both hard drives are good, and the controller is good, and I know that these are all compatible because I've done the exact same setup successfully on another Compaq PC. Why won't it work on this one?

Thanks....
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top