Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

SCSI drive transfer speed problem

Status
Not open for further replies.
docmeyer

docmeyer

Technical User
Oct 16, 2001
117
US
SCSI Guru's please help : )

The equipment:

ASUS P3C-S MB, onboard Adaptec AIC-7892 SCSI controller

(3) Fujitsu MAN3367MP
(1) Quantum Atlas III 318000TD-SW

The setup as it POSTS:

SCSI ID's
4, 5, 6 = Fujitsu drives
10 = Quantum
7 = controller

The problem? Transfer speed.
It sometimes shows up as:
160-80-10 (Fujitsu) and 80 for the Quantum or sometimes
160-80-ASYNC and 80 for the Quantum

I have the Quantum at the end of the SCSI chain, the other end terminating on the motherboard.

I have no idea how to get all of these at 160! I have the 3 Fujituss setup as a RAID 5 and the Quantum as a SWAP in Windows 2000.

Going crazy...any ideas?

TIA

~d The DI from PI
Virginia Beach, VA U.S.A.
 
Status
Not open for further replies.

Similar threads

ZEEEst
  • Locked
  • Question
Problem with the hard drive
Replies
2
Views
281
pmonett
pmonett
spiegela
  • Locked
  • Question
Unallocated space on hard/ssd Drive
Replies
3
Views
348
spiegela
spiegela
pmonett
  • Locked
  • Question
Why does a 4TB SSD format to a 2TB drive ?
Replies
2
Views
560
Rick998
Rick998
TomMannPhoto
  • Locked
  • Question
Drives disappear after adding new drive
Replies
1
Views
396
goombawaho
goombawaho
TheCubeFarm
  • Locked
  • Question
LAN transfer to External USB drive tanks speed but local disk to USB is ok
Replies
0
Views
143
TheCubeFarm
TheCubeFarm

Part and Inventory Search

Sponsor

Back
Top