SCSI card install

[imshake]

I know this is simple, but, I installed SCSI card for tape back-up in an NT4 w/s. On boot up, msg says bios needs updating. How do I boot to DOS in nt4 so I can flash bios?

 

[crisc]

With an NT boot disk

 

[JeffTH]

imshake, check out

http://www.bootdisk.com/

for a bootdisk that'll get you where you need to be.

 

[w98fxr]

A basic w9x or DOS boot disk will do fine. Some motherboard manufacturers provide a BIOS update download that will create the boot disk with flashing utility for you. You might consider flashing the SCSI card as well if possible.