hi, i'm sure this is simple, but i have a new script that i added to Symposium today. we use 4.0 at the moment. after i saved it, it didn't give me the option to Activate. so when i add it to the Master Script, Symposium is saying that it can't save because one of the scripts is not validated. but when i go back into the script, the option to activate or validate is grayed out. Help......
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Script in Edit Mode
- Thread starter telecomPA
- Start date
Milesprower
Programmer
Close out all scripts. Look at the script manager list. Open the script you want to validate. It should allow you to try to validate.
If the validate option is still grayed out, you may need to reboot the server (after first shutting down services properly). The server can get confused and may need a fresh start to clear out any conflicts.
If the validate option is still grayed out, you may need to reboot the server (after first shutting down services properly). The server can get confused and may need a fresh start to clear out any conflicts.
roadrunr92
Technical User
SCCS 4.0?? yeah -- that is a hard one...
- Status
Similar threads
- Locked
- Question
- Locked
- Question