Screensaver on 96xx phone.

[csheward]

Pardon the ignorance, but I'm looking for a way to turn off/on screensaver on a per phone basis.
And I would like to control which logo file on a per phone basis (not using USB) is being used.
Is there a way to do either of these?

 

[intrigrant]

You can use the GROUP parameter and setup different parameters per group in the settings file, create a group per extension and set a group number equal to the station number.
The GROUP Parameter
You might have different communities of users, all of which have the same telephone model,
but which require different administered settings. For example, you might want to restrict Call
Center agents from being able to Logoff, which might be an essential capability for
“hot-desking” associates. We provide examples
of the group settings for each of these
situations later in this section.
Use the GROUP parameter for this purpose:
1. identify which telephones are associated with which group, and designate a number for each group. The number can be any integer from 0 to 999, with 0 as the default, meaning your largest group is assigned as Group 0.
2. The GROUP parameter can only be set either at each individual telephone or when a telephone with Software Release 1.5 or greater is registered to an Avaya ommunication Manager (CM) server with CM Release 4.0 or greater. In the former case, the GROUP Craft (local administrative) procedure must be invoked as specified in the Avaya one-X™ Deskphone Edition for 9600 IP Telephones Installation and Maintenance Guide
. In the latter case, GROUP is administrable on a phone-by-phone basis on the CM Station Form.
3. Once the GROUP assignments are in place, edit the configuration file to allow each telephone of the appropriate group to download its proper settings.
Here is an example of the configuration file for the Call Center agent:
IF $GROUP SEQ 1 goto CALLCENTER
IF $GROUP SEQ 2 goto HOTDESK