I have a USB hard drive attached to my SCO OSR6 machine I accidently powered it off while it was mounted and now the OS complains when you try to re-mount it and it appears that it is complaining because it has a new device number so it isn't at the original device location anymore. does anyone have an idea how I could fix this?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
SCO OSR6
- Thread starter garycrow
- Start date
I haven't played with this much, once I saw that the logical device numbers change, it makes it a bit difficult to rely upon.
I think you can get the correct logical disk information from the "usbprobe" command.
"Proof that there is intelligent life in Oregon. Well, Life anyway.
I think you can get the correct logical disk information from the "usbprobe" command.
"Proof that there is intelligent life in Oregon. Well, Life anyway.
- Status