[SCO 506 AND ML380 G4]: problem using EFS 1

[tadan]

Hi all
I try to install sco 506 under ML380 G4. I've download efs 5.77a from hp site for the smartarry 6i controller, and when I insert the boot string, afert request of floppy, appairs an error about "there's not a ciss driver". I've also download the 5.64a efs from hp site but I have the same problem.
So I'm not able to using efs for the smartarray 6i
I'm using a floppy drive via usb.
Please someone have possibility to make me help?
Many thanks
Best Regards

Francesco Cabigliera





Francesco Cabigliera "Tadan"
----------------------------
Italiano Amateur Radio Station
----------- IW3IDS ---------
On Echolink - APRS Active

 

[motoslide]

Use a normal floppy drive (your processor has the hardware, you'll just need a cable and generic drive). SCO 5.0.6 probably cannot see a USB device. Check other warnings here about running older SCO on P4-based servers.

"Proof that there is intelligent life in Oregon. Well, Life anyway.