schedule routing service

[LJDirk]

follow Situation

- physical Line 151 & 152 is Pool A (BRI 1)
- physical Line 153 & 154 is Pool B (BRI 2)

- Pool A is Route 1
- Pool B is Route 2

- Schedule Routing is set to "auto" with Overflow "Y"
- "Schedule 4" points of Pool A (here named "Pool") is aktive - can see on the Control Set
- under "normal" i´ve programmed Pool B

- DN 100 has access to Pool A
- DN 101 has access to Pool B

When i dial the Destination Code "0" from DN 100, than dialout over Line 151 & 152 -> thats OK and what i´ll
When i dial the Destination Code "0" from DN 101, than dialout over Line 153 & 154 -> thats OK, but the Telephone displays "expensive Line" -> that also OK, because no second or third Route is programmed.

Programm i a second Route (the same what i programmed under "normal") and dialout from DN 101, it displays "disabled" but i can dialout.

What have i forgotten to programm or where is the Problem?

 

[acewarlock]

I have no clue what your doing or why your doing it.

What are you trying to do?

 

[LJDirk]

I´ll no Massage "expensive Line" or "disable" in Display from the Phone.