Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Schedule backup failed

Status
Not open for further replies.

htran7

MIS
Mar 24, 2003
8
US
When I do a manual backup from a client it works fine.
When I schedule a backup from the server it fails to backup the same client.
Below is log error messages.

Mar 24 09:46:15 lgbackup: --- Unsuccessful Save Sets ---
Mar 24 09:46:15 lgbackup: * ocfoctr-19488:All aborted
Mar 24 10:12:03 lgbackup: NetWorker Savegroup: (alert) Group Test aborted, savegrp is already running

Thanks for your help.


 
This means that the groups is still running.
Click on manange groups. You should see your group, with a yellow clock symbol. Right click on it and select stop.
This will stop your backup.
You might want to look at WHY the backup isn't completing.
Too much data, slow network, slow tape units, etc.
When you stop it will give you a completion report. Have a look at what servers failed and why.
Hope that helps.
 
Thanks for responding. Even I create a fresh new group I still get the same error. It's very strange.

 
On the backup server, stop NetWorker, then go to the nsr folder and delete the tmp directory. Then start NetWorker and try backing up again.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top