SCH3300 when adding DN 4

[81Cadmin]

Hi Everyone, We are shutting down an existing Avaya at another site and moving the DID to our head office. When attempting to create the 500 using the current DID we are getting SCH3300.

I suspect that the extension 1636 is programming somewhere in the AC1/2. How can I confirm this? And more importantly what options do I have available to make this DID work on our switch?

Here is an LUDN which I have only pasted the beginning. Notice 1xxx is not a programable option as available DID's are starting at 2xxx.

CUSTOMER 00 - UNUSED DNS:
2001 2007 2009 201 2020 2024 2025 2027 2028 2029
2031 2034 2035 2036 2038 2039 204 2050 2052 2054
2055 2056 2057 2058 2059 2060 2061 2062 2063 2064
2066 2067 2068 2069 2070 2071 2073 2074 2075 2076
2077 2078 2079 208 2091 2092 2093 2094 2095 2096
2097 2098 210 2111 2112 2114 2115 2116 2117 2118
2119 212 213 214 215 216 217 218 219 220
2211 2215 2216 2217 2218 2219 2221 2223 2224 2225

regards,
81CAdmin

 

[bigindian65]

have you prt DNB in ld 11 to see what comes back?

Mato' Was'aka

 

[81Cadmin]

I printed LD 90 to check and got these results...

MEM AVAIL: (U/P): 25944353 USED U P: 2532488 96851 TOT: 28573692
DISK SPACE NEEDED: 148 KBYTES
2MB BACKUP DISKETTE(S) NEEDED: 1 (PROJECTED LD43 - BKO)
REQ prt
CUST 0
FEAT net
TRAN ac1
TYPE npa

NPA 1636

NPA 1636
RLI 4
SDRR NONE
ITEI NONE

Would this prevent me from adding 1636 as a DID?

 

[81Cadmin]

here is the print from LD 11

REQ: prt
TYPE: dnb


CUST 0
DN 1636
DATE
PAGE
DES

SCH0886

NO ACT SINCE NO DATE


NACT

 

[bigindian65]

chg out your SPREE code of 1, then you can use it. I bet your spree is default 1.

Mato' Was'aka

 

[81Cadmin]

Here's a print of the error...

REQ: ****
OVL000
>err sch0886
SCH0886
Shorter DN number exists.

Severity: Info

 

[bigindian65]

prt DNB 1 - prolly get

DN 1
TYPE SFP

Mato' Was'aka

 

[81Cadmin]

Yes I get

REQ: prt
TYPE: dnb


CUST 0
DN 1
DATE
PAGE
DES

DN 1
TYPE SFP


NACT

 

[81Cadmin]

what's the impact of changing the spree code? What is the procedure to do this?

Cheers...

 

[GHTROUT]

The solution is to change the SFP (SPRE) to another, four digit number. You could make it 1111 for example.

Here is the list of things performed with an SFP (SPRE):

http://www.ghtrout.com/ghtrout/files/SPRE.html

You can create FFCs to make feature codes whatever you want.

The SPRE is print in LD 21

REQ PRT
TYPE FTR

and changed in LD 15

REQ CHG
TYPE FTR

[©] GHTROUT.com [⇔] A Variety of Free Resources for Nortel Meridian/CS1000 System Administrators

 

[bigindian65]

no biggie, as long as you know it, where to print it. I use it with but sets to forward/un forward fax machines -dial tone # 1 xxxx - just fyi

anyway
ld 15
chg
FTR_Data

when you get to

SPRE xx

enter a new one, I prefer a 3 or 4 digit one but two is fine like 88 or something, but why chew up a whole range?

prt in ld 21 prt CDB or FTR_Data

Mato' Was'aka

 

[bigindian65]

that's strike 2 Gene.....

Mato' Was'aka

 

[GHTROUT]

You could have submitted this idea:

If changing the SPRE isn't feasible, you can create an Incoming Digit Conversion table so that when 1636 is received on the trunks, it is converted to another number outside of the 1000's range.

[©] GHTROUT.com [⇔] A Variety of Free Resources for Nortel Meridian/CS1000 System Administrators

 

[GHTROUT]

PS: #1 for Call Forward isn't consider use of SPRE

[tt]
The following codes do not require the [SPRE]

# + 1 + DN Call Forward
# + 2 + Speed Call code + DN Speed Call, Individual, To Program Entry
# + 2 + Speed Call code + * Speed Call, Individual, To Erase Entry
# + 3 + Speed Call code Speed Call, Individual, To Use Entry
# + 4 Permanent Hold
[/tt]


[©] GHTROUT.com [⇔] A Variety of Free Resources for Nortel Meridian/CS1000 System Administrators

 

[81Cadmin]

excellent, thanks all. I've changed the SPREE and now all is well.

- Beers on me...