Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

SCH codes

Status
Not open for further replies.

dughard

Technical User
Apr 8, 2004
74
GB
Anyone know the meaning of SCH codes

SCH 4423
SCH 4695
SCH 9138

They don't appear in the 4.5 documentation I have.

They were generated from release 25.40B
 
The scenario when the SCH codes were generated was uploading an E processor database to a 25.40B release.I think at least one of them may be related to two cabs(E) v one cab(C)
 
Were they SYS codes that you had seen?.

SYS 4423

During DN translation in sysload, no MARP or more than one MARP was
found in the database for DN 'nnnn' in customer 'x'. Only one MARP
should be defined for a DN. The MARP database information for TN 'l s c
u' has been corrected and a default MARP TN selected for the DN. This
corrected database can be saved or altered further by service change
before saving with a data dump.

Severity: Critical

###############################################################

SYS 4695

The mnemonic, filter and exception tables have been removed. NOTE:
Their functionality has been replaced by the new Event Default and
Preference Tables for Option 81 switches.
Information only, no action required.

Severity: Info

###############################################################

SYS 9138

The mnemonic, filter and exception tables have been removed. NOTE:
Their functionality has been replaced by the new Event Default and
Preference Tables for Option 81 switches.
Information only, no action required.

Severity: Info






All the best

Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK

If it's working, then leave it alone!.
 
Thanks Firebird.
I have had a specsavers moment there !
 
Just do an ERR and whatever the error code is after you **** out of an overlay.

i.e.,

ERR TRK156

Sometimes the documentation and software don't always jive.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top