scexi

[Satellite1900]

Hi,
I have a problem.
I have a pbx loaded into tswsp5, I configured a rou isdn s0 with trunks on, but when I enter the command scexi I answered "trunk not present."
Who can help me?
Thank you.

 

[ceejay55]

If you are using BRA must be in a 00 slot to allow SCEXI:FEML=X-X-00-0;

 

[mundus]

or another 32 slot - x-x-10-0, x-x-20-0 etc.

 

[ceejay55]

Yes sorry meant to say in must be in x0 slot i.e 32 ts

 

[Satellite1900]

Thank you, I did the test on the new system TSWSP5 and works only on the positions 32ts, while in BC11 also on those from 8ts.
Regards

 

[whosrdaddy]

that was a bug on older systems(SXECI accepted the bpos), sync can only be given in timeslot 0, so a clock could never be transmitted from a position like 61,62 or 63.


/Daddy

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!