Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Sccs upgrade from rls 3.0 to rls 5.0 1
- Thread starter bradleyp
- Start date
-
1
- #2
According to Nortel:
"You cannot use any Nortel Networks platforms for Release 5.0 of Symposium Call Center Server because they cannot meet the minimum requirements for Platform Vendor Independence. These servers include:
- 701t servers
- 702t servers
- 1000t servers
- 1001t servers
- 1003t servers"
"You cannot use any Nortel Networks platforms for Release 5.0 of Symposium Call Center Server because they cannot meet the minimum requirements for Platform Vendor Independence. These servers include:
- 701t servers
- 702t servers
- 1000t servers
- 1001t servers
- 1003t servers"
brewerdude
IS-IT--Management
I also would not recommend doing the upgrade on the same server. Because you'll be going from NT4.0 to Win2k, you'll have to blow the server away and rebuild 2K on it. Nothing like loading an operating system during a migration... Plus, if something goes really wrong, you won't have a box you can roll back to.
Do yourself a favor and get a DL380.
Do yourself a favor and get a DL380.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question