I have a Solaris 2.6 server with one DLT7000 tape drive attached. I am trying to use the scanner cmd to read the tape and create the necessary indexes from backups on tape.
I am getting the following:
# scanner -im /dev/rmt/0cbn
scanner: scanning dlt7000 tape CFJ893 on /dev/rmt/0cbn
scanner: dlt7000 tape CFJ893 already exists in the media index
scanner: fn 2 rn 0 read error Not enough space
scanner: fn 2 rn 0 read error Not enough space
scanner: done with dlt7000 tape CFJ893
I did a reconfiguration reboot but stll get the error.
The inquire cmd returns:
scsidev@1.6.0:QUANTUM DLT7000 2561|Tape, /dev/rmt/0cbn
The entries in st.conf
# grep -i quantum st.conf
# "QUANTUM DLT7000"
# "Quantum DLT4000"
# "QUANTUM DLT7000", "QUANTUM DLT7000", "DLT7k-data",
# "Quantum DLT4000", "Quantum DLT4000", "DLT-data",
#DLT7k-data = 1,0x36,0,0x1D639,4,0x82,0x83,0x84,0x85,2;
How do I correct this?
I am getting the following:
# scanner -im /dev/rmt/0cbn
scanner: scanning dlt7000 tape CFJ893 on /dev/rmt/0cbn
scanner: dlt7000 tape CFJ893 already exists in the media index
scanner: fn 2 rn 0 read error Not enough space
scanner: fn 2 rn 0 read error Not enough space
scanner: done with dlt7000 tape CFJ893
I did a reconfiguration reboot but stll get the error.
The inquire cmd returns:
scsidev@1.6.0:QUANTUM DLT7000 2561|Tape, /dev/rmt/0cbn
The entries in st.conf
# grep -i quantum st.conf
# "QUANTUM DLT7000"
# "Quantum DLT4000"
# "QUANTUM DLT7000", "QUANTUM DLT7000", "DLT7k-data",
# "Quantum DLT4000", "Quantum DLT4000", "DLT-data",
#DLT7k-data = 1,0x36,0,0x1D639,4,0x82,0x83,0x84,0x85,2;
How do I correct this?