We just setup a new scalar i500 which is attached to a solaris 9 box but no tape drive or autochanger can be seen through inquire. During the boot sequence, there is a warning message:
WARNING: fp1: no driver for device @w500308c09d3c5b4b,0:
compatible: scsiclass,0c.vQUANTUM.pScalar_i500.r57B2 scsiclass,0c.vQUANTUM.pScalar_i500 scsa,0c.bfcp scsiclass,0c scsiclass
I check /dev/rmt and see that they are populated under there.
backup02# cfgadm -al -o show_FCP_dev c2::500308c09d3c5b4b
Ap_Id Type Receptacle Occupant Condition
c2::500308c09d3c5b4b,0 array-ctrl connected unconfigured unknown
c2::500308c09d3c5b4b,1 tape connected configured unknown
c2::500308c09d3c5b4b,2 tape connected configured unknown
c2::500308c09d3c5b4b,3 tape connected configured unknown
c2::500308c09d3c5b4b,4 tape connected configured unknown
c2::500308c09d3c5b4b,5 med-changer connected configured unknown
backup02# inquire -v
scsidev@0.6.0:TOSHIBA DVD-ROM SD-M14011009|CD-ROM, /dev/rdsk/c0t6d0s2
backup02# luxadm probe
Found Enclosure:
SUNWGS INT FCBPL Name:FCloop Node WWN:508002000019fb80 Logical Path:/dev/es/ses0
Found Fibre Channel device(s):
Node WWN:500308c09d3c5b4a Device Type:Tape device
Logical Path:/dev/rmt/0n
Node WWN:500308c09d3c5b4a Device Type:Tape device
Logical Path:/dev/rmt/1n
Node WWN:500308c09d3c5b4a Device Type:Tape device
Logical Path:/dev/rmt/2n
Node WWN:500308c09d3c5b4a Device Type:Tape device
Logical Path:/dev/rmt/3n
backup02#
I opened a service call with legato and quantum but there is no progress so far. Does anybody have any advice? Thx
WARNING: fp1: no driver for device @w500308c09d3c5b4b,0:
compatible: scsiclass,0c.vQUANTUM.pScalar_i500.r57B2 scsiclass,0c.vQUANTUM.pScalar_i500 scsa,0c.bfcp scsiclass,0c scsiclass
I check /dev/rmt and see that they are populated under there.
backup02# cfgadm -al -o show_FCP_dev c2::500308c09d3c5b4b
Ap_Id Type Receptacle Occupant Condition
c2::500308c09d3c5b4b,0 array-ctrl connected unconfigured unknown
c2::500308c09d3c5b4b,1 tape connected configured unknown
c2::500308c09d3c5b4b,2 tape connected configured unknown
c2::500308c09d3c5b4b,3 tape connected configured unknown
c2::500308c09d3c5b4b,4 tape connected configured unknown
c2::500308c09d3c5b4b,5 med-changer connected configured unknown
backup02# inquire -v
scsidev@0.6.0:TOSHIBA DVD-ROM SD-M14011009|CD-ROM, /dev/rdsk/c0t6d0s2
backup02# luxadm probe
Found Enclosure:
SUNWGS INT FCBPL Name:FCloop Node WWN:508002000019fb80 Logical Path:/dev/es/ses0
Found Fibre Channel device(s):
Node WWN:500308c09d3c5b4a Device Type:Tape device
Logical Path:/dev/rmt/0n
Node WWN:500308c09d3c5b4a Device Type:Tape device
Logical Path:/dev/rmt/1n
Node WWN:500308c09d3c5b4a Device Type:Tape device
Logical Path:/dev/rmt/2n
Node WWN:500308c09d3c5b4a Device Type:Tape device
Logical Path:/dev/rmt/3n
backup02#
I opened a service call with legato and quantum but there is no progress so far. Does anybody have any advice? Thx