Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

SBC display mismatch with the Equinox Client

Status
Not open for further replies.
AllanM1973

AllanM1973

Technical User
May 19, 2011
10
FR
Hi all,
I'm using the Equinox Client
I dial an external call (appear correctly into my screen)
When the call is established, the screen of the Equinox client display 56845ca0c9a78fcc38bf9d746b94de7b instead of the external number.
When i'm troubleshooting, it's the SIP provider who send me it under the "contact <sip:56845ca0c9a78fcc38bf9d746b94de7b@'ip address""
Then when this information arrive into the ACM, it used.
I follow also the documentation : CCMSM80SBC72UDP.pdf (best practice for SIP Trunk).
How could i force the ACM to do not use the contact information ?

thanks for your help if you could.
Allan
 
Status
Not open for further replies.

Similar threads

fondog2
  • Locked
  • Question
SBC Signal Manipulation script 1
Replies
4
Views
462
JefferP
JefferP
fondog2
  • Locked
  • Question
ASM to SBC link down
Replies
2
Views
310
fondog2
fondog2
fondog2
  • Locked
  • Question
SBC Trunk/Remote worker registration
Replies
0
Views
218
fondog2
fondog2
luckjoe
  • Locked
  • Question
Config Teams Direct routing witch audiocode SBC
Replies
1
Views
155
avayaguy23
avayaguy23
Traveler74
  • Locked
  • Question
Finding the media gateway with a down status in the haystack
Replies
3
Views
395
Traveler74
Traveler74

Part and Inventory Search

Sponsor

Back
Top