SBC and SIP Trunk setup

[dereklindo]

Hi all,

Does anyone have any experience configuring an Audiocodes Mediant 500L SBC? If yes, can you pass on any guidance for setting up SIP trunks in it and communicating with an IPOffice 500v2?

Thanks in advance!

Derek

 

[biv343]

The AudioCodes SBC wizard does a good job and gets you 95% of the way there to having a working AudioCodes INI file, especially if the SIP provider you're using is in their templates list. On the IPO side its a regular SIP trunk pointing to the SBC internal address.