I have a netbuilder 432 that I cannot login to properly. Every time I restart it I have to reset and choose a boot.68k file and then re do my configs. Then if I change the default boot to point at the file I have booted to I cant login, the access is denied. Or I have insufficient privilages to do something. I guess my basic question in a long winded way is how can I save the config and have it remebered after I shut down and restart? Are there other config files I need to look for? How do I search? (very new to 3com, ok with Cisco)
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
save a boot.68k file?
- Thread starter dublklik
- Start date
- Thread starter
- #2
finally worked it out! I was choosing the boot file and making changes then on reboot it could not find a boot.68k file. BECAUSE I had changed the boot option to a different folder eg a:\BOOT and making changes while in the PRIMARY folder. DOH! I was only using the boot.68k file from the boot folder to boot with into the Primary folder. Adding the boot.68k file to the PRIMARY folder works a charm! 
- Status
Similar threads
