I have upgraded from 9.x to 10.0 on my Primary server. Upgrade seemed ok but now the Symantec Antivirus service is stopping (Event ID 7031). I have set windows to restart the service but curious to see if anyone else is having this problem. Also found this article on Symantec but looks like no fix yet.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
SAVCE 10 Service Stops
- Thread starter epohl
- Start date
this has been my experience also in most all of the versions. I have done the following and it seems to remedy the problem for a while.
Download and run the lastest sevinst.exe file (System event)
Delete any *.tmp files associated with symantec or temp files that were created during the installation
HTH - Stiddy
Download and run the lastest sevinst.exe file (System event)
Delete any *.tmp files associated with symantec or temp files that were created during the installation
HTH - Stiddy
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question