Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
SATA hard drives-can't install NT4
- Thread starter Sisco22
- Start date
More info please.
Just one comment:
Does your motherboard need it's SATA controller drivers loading at the beginning of the OS install in order for the system to recognise the hard drive?
Typically press F6 with SATA drivers extracted onto a floppy disk and in the floppy drive (choose your OS, install the SATA drivers)
Martin
We like members to GIVE and not just TAKE.
Participate and help others.
Just one comment:
Does your motherboard need it's SATA controller drivers loading at the beginning of the OS install in order for the system to recognise the hard drive?
Typically press F6 with SATA drivers extracted onto a floppy disk and in the floppy drive (choose your OS, install the SATA drivers)
Martin
We like members to GIVE and not just TAKE.
Participate and help others.
- Thread starter
- #3
When i boot from the CD and it says press any cd to boot from CD, i press a key and it comes up to the blue screen installing drivers and whatnot...and it gets to the SCSI CDROM and then after that it has rows of hearts and little circle type things running up and down the screen. Any idea of what is causing that?
- Status
Similar threads
- Locked
- Question