Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

SAR command sar -r in AIX showing wrong report? Can you help?

Status
Not open for further replies.

enuda

MIS
Nov 2, 2005
1
US
Hello gurus,

I am trying to run the sar -r command to show the Memory Free and Used (sar -r) in a AIX 7.1 environment as show below:

Linux 2.6.18-194.el5PAE (dev-db) 03/26/2011 _i686_ (8 CPU) <<<----obviously run in a linux environment

07:28:06 AM kbmemfree kbmemused %memused kbbuffers kbcached kbcommit %commit kbactive kbinact
07:28:07 AM 6209248 2097432 25.25 189024 1796544 141372 0.85 1921060 88204
07:28:08 AM 6209248 2097432 25.25 189024 1796544 141372 0.85 1921060 88204
07:28:09 AM 6209248 2097432 25.25 189024 1796544 141372 0.85 1921060 88204
Average: 6209248 2097432 25.25 189024 1796544 141372 0.85 1921060 88204


However, in my AIX 7.1 environment, when I run the same sar -r command, I get the following report:

AIX rasmq02hdqra 1 7 000185BBD400 03/27/15

System configuration: lcpu=64 mem=255488MB mode=Capped

10:01:00 slots cycle/s fault/s odio/s
10:02:00 5863414 0.00 469.57 11.79
10:03:00 5863416 0.00 485.78 9.56
10:04:00 5863416 0.00 470.51 12.02
10:05:00 5863408 0.00 483.38 10.60
10:06:00 5863408 0.00 488.31 8.64
10:07:00 5863412 0.00 467.11 10.08
10:08:01 5863412 0.00 466.97 10.44
10:09:00 5863409 0.00 602.05 13.50
10:10:00 5863401 0.00 460.52 10.38
10:11:00 5863409 0.00 469.30 9.55
10:12:00 5863410 0.00 486.17 8.66
10:13:00 5863408 0.00 466.75 8.86
10:14:00 5863413 0.00 468.32 8.84
10:15:00 5863408 0.00 503.40 10.20
10:16:00 5863408 0.00 351.15 7.70
10:17:00 5863413 0.00 460.62 10.01
10:18:00 5863414 0.00 483.70 9.49
10:19:00 5863412 0.00 474.95 11.11
10:20:00 5863407 0.00 483.22 9.31
10:21:00 5863395 0.00 510.49 15.35
10:22:00 5863395 0.00 467.75 9.64
10:23:00 5863387 0.00 1879.74 17.06
10:24:00 5863393 0.00 875.80 848.41
10:25:00 5863387 0.00 497.70 11.58
10:26:00 5863390 0.00 469.29 9.84
10:27:00 5863394 0.00 469.15 11.25
10:28:00 5863394 0.00 502.38 25.13
10:29:00 5863395 0.00 491.39 42.77
10:30:00 5863365 0.00 578.45 906.23
10:31:00 5863374 0.00 493.66 25.76
10:32:01 5863387 0.00 515.18 851.98
10:33:01 5863392 0.00 505.17 22.70
10:34:00 5863395 0.00 570.22 868.21
10:35:00 5863387 0.00 473.32 928.31

Can someone show me how to get the same report as the first report obviously run in a linux environment?

Any help will be highly appreciated.

okonita

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top