rcbatlinux
Technical User
Anyone every try to run "sar" and get this message?
rcbatlinux
rcbatlinux
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
sar: Can't open /usr/adm/sa/sa15
- Thread starter rcbatlinux
- Start date
- Status
stanhubble
MIS
The are a couple of reasons to get this message.
1- you are not root or don't have permissions to read the file
2- sar is not enabled so statistics are not being recorded
can you do something like: sar 5 5
to enable sar : /usr/lib/sa/sar_enable -y
hth
stan
1- you are not root or don't have permissions to read the file
2- sar is not enabled so statistics are not being recorded
can you do something like: sar 5 5
to enable sar : /usr/lib/sa/sar_enable -y
hth
stan
Nostradamus
Technical User
It's not the logged statistics you're trying to look at?
(Perhaps those are stored under /var/adm/sa)
If so, you should use sar -o or sar -f to view them.
My guess is that it's not enabled though, as stan suggested. /Sören
(Perhaps those are stored under /var/adm/sa)
If so, you should use sar -o or sar -f to view them.
My guess is that it's not enabled though, as stan suggested. /Sören
Megabitman
MIS
You might want to load SarCheck from the skunkworks cd... nice utility to understand what sar is trying to tell you (AFTER you enable sar...)
- Status
Similar threads
- Locked
- Question