SAR at site - Need to Implement

[janaya]

Here is my SAR Group (group 2) - for testing purposes
SGRP 002
SCDR YES
OFFP 1
STAR 00 00<--- start of my "can't use the phone" period.
STOP 15 00<--- end of my "can't use the phone" period.
DAYS 2 3 4 5 6 <--- Monday through Friday
COS TLD <--- during this time all phones are toll denied
TGAR 02<-- and cannot access RDB with TGAR 2
NCOS 00<--- and the phone drops to NCOS of 0 (zero)
OFFP 2
STAR 15 01
STOP 15 30
DAYS 2 3 4 5 6
COS TLD
TGAR 00
NCOS 00
OFFP 3
STAR 15 31
STOP 23 59
DAYS 2 3 4 5 6
COS TLD
TGAR 00
NCOS 00
OFFP 4
STAR 00 00
STOP 23 59
DAYS 1 7
COS TLD
TGAR 00
NCOS 00
ICR NO
LOCK 1


My Phone is placed in this SGRP - 2

DES CO1
TN 014 0 00 06
TYPE 3904
CDEN 8D
CUST 0
FDN 102
TGAR 1
LDN NO
NCOS 1
SGRP 2 <--- here is my entry
RNPG 0
SCI 0
SSU
LNRS 16
XLST
CLS CTD FBD WTA LPR MTD FNA HTA TDD HFA GRLD CRPD STSD
MWA LMPN RMMD SMWD AAD IMD XHD IRD NID OLD VCE DRG1
POD DSX VMD CMSD SLKD CCSD SWD LNA CNDA
CFTD SFD MRD DDV CNID CDCA MSID DAPA BFED RCBD
ICDD CDMD LLCN MCTD CLBD AUTU
GPUD DPUD DNDA CFXA ARHD FITD CLTD ASCD
CPFA CPTA ABDD CFHD FICD NAID BUZZ AGRD MOAD AHD
DDGA NAMA
DRDD EXR0
USMD USRD ULAD RTDD RBDD RBHD PGND FLXD FTTC DNDY DNO3 MCBN
CDMR
CPND_LANG ENG
RCO 0
HUNT 102
LHK 1
PLEV 02
CSDN
AST
IAPG 0
AACS NO
ITNA NO
DGRP
MLWU_LANG 0
MLNG ENG
DNDR 0
KEY 00 SCR 456 0 MARP
CPND
NAME T1 SERVER ROOM
XPLN 14
DISPLAY_FMT FIRST,LAST
01 SCR 566 0 MARP
CPND
NAME T1 SERVER ROOM
XPLN 14
DISPLAY_FMT FIRST,LAST
02
03 ADL 16
04 ADL 16
05 ADL 16
06 ADL 16
07 ADL 16
08
09 ADL 16
10 ADL 16
11 ADL 16
12
13
14
15
16 MWK 102
17 TRN
18 AO6
19 CFW 16 915019523152
20 RGA
21 PRK
22 RNP
23
24 PRS
25 CHG
26 CPN
27 CLT
28 RLT
29
30
31
DATE 13 FEB 2006

In My AUT block I have added a authorization code to use when I need to bypass this SAR restriction.

MEM AVAIL: (U/P): 2320641 USED U P: 638854 87928 TOT: 3047423
DISK RECS AVAIL: 1152
REQ prt
TYPE aut
CUST 0
SPWD
CODE 135792468
CODE 135792468 SARC YES SGRP 002 SERV ENA DSA LKA UNA

The TGAR setting on my LD route is set at 2 so that I can restrict to all calls to the route in my SAR setting.

I have set this up and when I am in my time to need an authcode to dial out, I can dial out direct. There is no restriction. Any ideas, or am I just missing something?

John

 

[janaya]

Well I guess they forgot to print something in the book. They (you know Them - ETAS) told me you need to reset the time in ld 2 (STAD yada..yada) so that the SAR table will reset.

good to know, since..

IT'S NOT IN THE BOOK!!!!

John

 

[johnpoole]

before time adjust worked we had to ini, that wasn't in the book either.. found that out after a power glitch and a 2 month old sar started working and of course it was built backwards.. took forever to find out why 911 couldn't dial out 9 to 5.. of course the panic call was about 9:05, i was 60 miles away and the kid calling had a badge and a gun... tough monday

john poole
bellsouth business
columbia,sc