SAP-ERP Installation failure

[zyxwvu123]

Hi,
Iam installing SAP-ERP on AIx 6.1 with DB2 database.The Installation failed at the database instance creation step and the following error was found in the trace.

EJS_Base::dispatchFunctionCall() JS Callback has thrown unknown exception rethrowing .

Anyone have any idea on how to resolve this issue..I don't want to start the installation again from scratch.

Thanks in advance.

 

[rgaskill1]

Hi,
Just did a very quick search on SAP net and found note 1052298.

TRACE 2007-12-17 12:13:42.473 [iaxxejsbas.hpp:460]
EJS_Base::dispatchFunctionCall()
JS Callback has thrown unknown exception. Rethrowing.

Might be worth a look.

Good luck
Richard

 

[rgaskill1]

Also, have a look at note 858969.

 

[zyxwvu123]

Thanks for the reply ! I forgot to mention that i have DB2 version 9.5 and so not sure whether to follow the steps of note 858896.note 1052298 doesn't have information on this error.

Please help to proceed further.I am blocked at this database instance creation step.

 

[rgaskill1]

Hi,
I don't think the DB version matters.
I should test the mapping of hostname to ip address as per the note - if it is ok then you obviously have a different issue.

Might be worth including more of the error message in this post.

Regards
Richard

 

[zyxwvu123]

Hi Richard,
Thank you so much for ur info.I have to check the hostnames as per the SAP not but for now,I am giving you the additional info on the error..

INFO 2008-04-23 23:43:30 [iaxxejsexp.cpp:107]
EJS_Installer::invokeModuleCall()
Working directory changed to /tmp/sapinst_instdir/ERP/SYSTEM/DB6/HA/ABAPJAVA/DB.

ERROR 2008-04-23 23:43:31 [iax6binstc.cpp:411]
CDB6Instance::CreateInstance(const map<iastring,iastring>&)
lib=iamoddb6 module=CDB6Instance
MDB-01006 DBI1001I Usage:

db2icrt [-h|-?]
[-d]
[-a AuthType]
[-p PortName]
[-s InstType]
-u FencedID InstName

Explanation:

An invalid argument was entered for the db2icrt command. Valid arguments
for this command are:

-h|-? display the usage information.

-d turn debug mode on.

-a AuthType
is the authentication type (SERVER, CLIENT, or SERVER_ENCRYPT)
for the instance.

-p PortName
is the port name or port number to be used by this instance.

-s InstType is the type of instance to be created (ese,wse,
standalone, or client).

ese used to create an instance for a DB2 database server
with local and remote clients with DPF support. This
type is the default instance type for DB2 Enterprise
Server Edition.

wse used to create an instance for a DB2 database server
with local and remote clients. This type is the
default instance type for DB2 Workgroup Edition, DB2
Express or Express-C Edition, and DB2 Connect
Enterprise Edition.

standalone
used to create an instance for a DB2 database server
with local clients. This type is the default instance
type for DB2 Personal Edition.

client used to create an instance for a IBM Data Server
Client. This type is the default instance type for IBM
Data Server Client products and DB2 Connect Personal
Edition.



DB2 products support their default instance types and the
instance types lower than their default ones. For instance, DB2
Enterprise Edition supports the instance types of 'ese', 'wse',
'standalone' and 'client'.


-u FencedID
is the name of the user under which fenced UDFs and fenced
stored procedures will be run. This flag is not required if
only a IBM Data Server Client is installed.

InstName is the name of the instance.

User response:

Confirm that user IDs and group names used to create the DB2 instance
are valid. For information about naming rules, see the topic called
"User, user ID and group naming rules" in the DB2 Information Center.

Refer to the DB2 Information Center for a detailed description of the
command. Correct the syntax and reissue the command.

ERROR 2008-04-23 23:43:31
FCO-00011 The step CreateInstance with step key |NW_Doublestack_DB|ind|ind|ind|
ind|0|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_CreateDB|ind|ind|ind|ind|0|0|N
W_DB6_DB|ind|ind|ind|ind|1|0|NW_DB6_CreateDB2Instance|ind|ind|ind|ind|2|0|Create
Instance was executed with status ERROR .

INFO 2008-04-24 00:07:22 [iaxxgenimp.cpp:782]
showDialog()
An error occured and the user decide to stop.\n Current step "|NW_Doublestack_DB
|ind|ind|ind|ind|0|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_CreateDB|ind|ind|
ind|ind|0|0|NW_DB6_DB|ind|ind|ind|ind|1|0|NW_DB6_CreateDB2Instance|ind|ind|ind|i
nd|2|0|CreateInstance".

INFO 2008-04-24 00:07:22 [syuxcpath.cpp:351]
CSyPath::createFile()
Creating file /tmp/sapinst_instdir/ERP/SYSTEM/DB6/HA/ABAPJAVA/DB/__instana_tmp.x
ml.

iauxsysex.c:317: child /tmp/sapinst_exe.311434.1209012078/sapinst (pid 249892) h
as crashed. Executable directory is /tmp/sapinst_exe.311434.1209012078. Contact
Support.
iaextract.c:814: child has signaled an exec error. Keeping directory /tmp/sapins
t_exe.311434.1209012078


The users were created by sapinst itself but not sure what failed to be a parameter for db2icrt.