SAP 46c installation guide

[Lazous]

Hi,

if any one has steps for installation of sap 4.6c on a stand alone machine please help me.

thank u.

 

[rpadman]

Do you happen to have the installation steps for SAP 4.6c on a stand alone machine. thanks

ram

 

[Lazous]

Hi ram,
here is the installation steps for SAP 4.6C,but i got the same problem as described here:

http://www.tek-tips.com/viewthread.cfm?qid=900365&page=1

if u happen to succeed pls let me know how.



Installation Of SAP 4.6c

System Requirements.

P-111 System
1024 MB or 512 MB
40 GB Hdd (2gb for WinNT 38 GB for oracle & SAP)
10 GB Hdd for CD dumps.
CDROM drive.

C:\ - 2Gb-WINNT
D:\-38Gb-Oracle & SAP
E:\-10Gb-CD Dumps
F:\-CDROM Drive

Boot the system from NT CD-ROM
Create 2Gb partition in NTFS & install WinNT SERVER
Computer Name - SAPSRV
Install as STANDALONE SERVER
IP Address - 192.168.1.2
Subnet Mask - 255.255.255.0
Work Group - TEKSOFT
Complete the installation & Restart.

Install Service Pack 6
Install VGA Drivers
Install IE5
Create remaining Hard Disk space as one partition (D in NTFS.

Create two Users as mentioned bellow

a. First user name TEKADM
Give password, disable the already enabled option & enable
"Password Never Expires & user cannot change the password option "
Go to his Group & give him Administrator Rights.
Go to his profile and specify the user profile path "C:\users\%USERNAME%".

b. Second user name SAPServiceTEK
Give password, disable the already enabled option & enable
"Password Never Expires & user cannot change the password option "
Go to his Group & give him Administrator Rights.
Go to his profile and specify the user profile path "C:\users\%USERNAME%".
Go to Policies /User rights & give this user the right to "Log on as service".

Change hostfile

Open C:\Winnt\System32\driver\ect\host file in Notepad & add IP Address and Computer Name in
The bottom of file. Save & Exit.


GO to start\settings\control pannel\Performance\Change Button & Change

C: 2Mb
2Mb

D: 1536Mb
1792Mb
This will increase the Page File size.

GO to start\settings\control pannel\system\Network Neighborhood\services\server\properties
Choose "Maximize Throughput for NT apps"
Save & Restart the system.

Logon as TEKADM
Insert SAP-Oracle CD &
Select F:\NT\i386\setup & click enter
Oracle home:TEK817
Location of oracle D:\oracle\tek\817
Accept path change & click enter
Oracle 8 enterprise edition & click enter


After completion of oracle go to start\settings\control pannel\services & select
"Oracle TNSlistner 80" & stop the service.
Select F:\NT\i386\Patchs\8.1.7.1\SAP817SRV & click enter
Select path: D:\oracle\tek\817 and unzip
Restart the system.

Dump all the export CDs (6 CDs) into
E:\dump\db1 - export CD 1
E:\dump\db2 - export CD 2
E:\dump\db3 - export CD 3 (To dump type as E:\dump\db1>Xcopy /e f: & enter)
E:\dump\db4 - export CD 4

Insert Kernel CD
Select F:\NT\i386\mmc\IMMC & click enter
This will install MMC
Select F:\NT\i386\mmc\ADS & enter
This will install Active Dir. Services
Select F:\NT\i386\NTPATCH\R3dllins & click enter
This will install patch for NT
Restart the system.

Logon as TEKADM
From kernel CD
F:\NT\common\r3setup & enter
Enter the following

System Name - TEK
Location - C:\users\Tekadm\install (it comes by default)
Accept to restart the machine.


Start r3setup central & database instance from
Start\programe
& Follow as mentioned bellow

System Name - TEK
Instance no. - 00
Accept Defaults
Directory of SAP system -change to D:
RAM of the sys. - Accept the default
Accept Defaults
Select WE8DEC (default for r/3 4.x system) & enter
Oracle dir. - D:
Port no. - 3600
Enter the password of TEKADM two times
Enter the password of SAPServiceTEK two
Location of SAP Database specific files

SAP Database Drive

SAPARCH D
SAPBACKUP D
SAPCHECK D
SAPREORG D
SAPTRACE D & enter


Location of Oracle Data files

Oracle Data directory drive

SAPDATA1 D
SAPDATA2 D
SAPDATA3 D
SAPDATA4 D
SAPDATA5 D
SAPDATA6 D & enter


Location Database LOG files

Dir. for LOG files Drive

ORIGLOGA D
ORIGLOGB D & enter


Location Mirrored Database LOG files
(Change from D to C)

Dir. for LOG files Drive

MIRRLOGA C
MIRRLOGB C & enter

Accept the default RAM & enter

Location of export CDs dump

CD name Location Copy destination

KERNEL F:
EXPORT1 E:\dump\db1
EXPORT2 E:\dump\db2
EXPORT3 E:\dump\db3
EXPORT4 E:\dump\db4 (Clear this field)
& enter


Enter the Password of TEKADM
No. of parallel process - 1
Start installation.

Wait for 14 to 15 Hrs & installation will come Upto 91% & will ask for SAPr3 password.
Enter the password of TEKADM & enter

This will come upto 95%
Come to the r3setup screen & click next.
This will bring upto 100% & the installation is over.
Exit the r3setup & stop the "TEK"service & Restart the system.


POST INSTALLATION TASKS


After Sap installation, install GUI in the server.
Restart the system.
Open SAP Management Console & start the sap service.

Start the Sap Frontend from the start\programs\sap frontend\sapsrv.
Logon as
Client 000
User name DDIC
Password 19920706
Language en


Go to Tools\administrator\Transports\transport maint. Systems & enter
Click save in T.M.S & come back.

Go to Tools\Ccms\Configuration\Profile Maintenance & click enter
From menu Utilities\import profiles\Of Active Servers & click.

Save & exit


Stop SAP service & start in SAP Management Console.

Logon as 000 DDIC 19920706 en
Go to Tools\administrator\administrator\client administration\client maintenance & enter

Click on new entries
Create Client 600.
Save & exit


Logon as
600
sap*
pass
en
Go to Tools\administrator\administrator\client administration\client copy\local copy & enter.

Source client 000
Target client 600
Profile cust.
User 000

Start the copy process.
This will copy the client & will take 4 to 5 hrs.

 

[rpadman]

thank you. i will let you know the progress. thank you

ram