Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Samsung DCS help !!

Status
Not open for further replies.

sjs1717

Technical User
Oct 22, 2007
87
US
Another system I inherited that suffered a complete memory loss today.... I have some of it back up and running but need help


Their Cadence VM seems to need some type of hunting and association to the voice system..... If you hit the message button on the phones it gets a busy signal.

They have DID's that are available on an out call button. I am not sure how to point the numbers to the correct sets

There seems to be a series of extensions that are out..... when you call them it system is stating the trunks are out of service.


Steve
We're doing this stuff for the wealth and fame right?
 
That's an old one then, The mmc for ddi's is 714. It sounds like it's probably a PSU problem, the old samsungs were a bit prone to that. I'm afraid I can't help you on the cadence as that had been and gone before I started on Samsungs, but the hunt group (mmc 601) with the voicemail ports in it will need to have the group type set to cadence.

Good luck
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top