Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

sample config

Status
Not open for further replies.

Phlatts

IS-IT--Management
Oct 5, 2000
2
0
0
CA
I have a 2503 and a 2610 router and will like to connect them using a DCE and DTE cables would like to see a sample config.
 
2514 S0
!
interface Serial0
ip address 192.1.3.5 255.255.255.0
no fair-queue
clockrate 56000
no cdp enable
!

2503 S1
interface Serial1
ip address 192.1.3.6 255.255.255.0
no fair-queue
no ddp enable

HDLC is the default encapsulation so you do not need to specify it

keep clock rate at 56000

clocking only on DCE router port

Mike S

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top